Choosing the Right Hermetic Feedthrough for Industrial Equipment

Industrial equipment often operates in environments where ordinary electrical connectors cannot provide sufficient protection against leakage, moisture, pressure differences, or contamination. In these situations, hermetic seals and hermetic connectors help maintain a controlled environment while allowing electrical signals and power to pass through equipment walls and enclosures.

Selecting the right component requires more than matching the connector dimensions or the number of electrical contacts. Engineers must understand the operating environment, pressure requirements, electrical loads, materials, mounting arrangement, and expected service life. A component that performs well in one industrial application may not be suitable for another.

Hermetic feedthrough technology supports industrial equipment by combining electrical transmission with a sealed interface. Companies such as PAVE Technology offer solutions for applications where environmental isolation and dependable electrical connections are important.

Understand the Equipment’s Operating Environment

The first step in selecting a hermetic feedthrough is to identify the conditions in which it will operate. Industrial environments vary widely, from clean laboratory equipment to machinery exposed to vibration, chemicals, high temperatures, or pressurized fluids.

Engineers should document the normal operating conditions and the most demanding conditions the component may experience. These include minimum and maximum temperatures, pressure differentials, possible chemical exposure, vibration, mechanical shock, and humidity.

It is also important to consider whether the equipment operates continuously or experiences frequent start-and-stop cycles. Thermal cycling and repeated pressure changes can place additional stress on sealing interfaces.

The surrounding environment matters as much as the interior. A connector mounted on the outside of an enclosure may be exposed to rain, dust, cleaning chemicals, or accidental impact. The selected assembly must meet the requirements of both sides of the barrier.

A clear environmental specification helps narrow the available options and prevents engineers from choosing a component based on incomplete information.

Determine the Required Sealing Performance

Hermetic seals are designed to restrict leakage through an assembly, but the required leakage limit depends on the application. Some industrial systems need extremely low leakage rates, while others may have different acceptance criteria based on their operating purpose.

Engineers should establish the maximum allowable leak rate before selecting a component. They should also identify the test method used to verify that performance.

Helium leak testing is commonly used for applications requiring measurement of very low leakage rates. Other pressure-based tests may be suitable for different requirements. Because test methods have different capabilities, their results should not be compared without considering the procedure and measurement limits.

The complete installation must also be considered. Even if a connector has a hermetic internal seal, leakage can occur at the interface between the connector and the equipment housing if the mounting arrangement is unsuitable.

Engineers should therefore evaluate the sealing performance of the complete assembly, including the mounting method, mating surfaces, and any additional seals required by the design.

Select the Appropriate Sealing Technology

Different sealing technologies are available for industrial applications. The best choice depends on pressure, temperature, electrical requirements, mechanical stresses, chemical compatibility, and cost.

Glass-to-metal seals are used in many hermetic electrical assemblies because they can provide a stable sealed interface when the materials and manufacturing process are properly matched. Ceramic-to-metal sealing may be selected when the application requires particular electrical insulation or temperature characteristics.

Other engineered sealing approaches may be suitable for specific cable arrangements or operating environments. Their suitability must be verified against the product’s documented limits rather than assumed from the general type of sealing material.

Material compatibility is especially important in chemical processing and fluid-handling applications. Engineers should confirm whether the sealing materials, conductor insulation, housing, and any mounting seals can withstand the substances they may encounter.

The correct selection should be based on the complete set of requirements, not simply on whether a technology is commonly used in the industry.

Match the Electrical Specifications

A hermetic connector must provide the required electrical performance while preserving the seal. Engineers should begin by identifying the number of conductors, current requirements, voltage rating, insulation requirements, and type of signal being transmitted.

Power connections may require larger conductors or contacts to handle current without excessive heating. Low-level measurement signals may require attention to electrical noise, shielding, grounding, and insulation resistance.

High-frequency signals can introduce additional requirements involving impedance, insertion loss, and signal integrity. Coaxial or other specialized connector arrangements may be more appropriate than a general-purpose multipin configuration.

The design should also account for electrical separation between adjacent contacts and between each contact and the housing. The relevant requirements depend on the voltage, environment, applicable standards, and intended use.

Choosing a feedthrough with extra contacts may appear convenient, but it is important to verify that the arrangement meets spacing, current, and insulation requirements. The complete electrical specification should be reviewed before finalizing the design.

Evaluate Pressure and Vacuum Requirements

Industrial equipment may operate under positive pressure, negative pressure, or changing pressure conditions. A component designed for one situation should not automatically be assumed suitable for another.

Engineers should identify the maximum and minimum pressures, the direction of the pressure differential, and the expected frequency of pressure changes. They should also determine whether the system may experience rapid pressurization or other unusual operating events.

A pressure rating must be interpreted according to its definition. Normal operating pressure, proof pressure, and burst pressure represent different conditions and are not interchangeable.

Vacuum applications may require additional attention to leakage, outgassing, and materials that could release unwanted substances into the chamber. These concerns can be particularly important in analytical instruments and sensitive manufacturing processes.

PAVE Technology’s relevant product specifications should be reviewed to determine whether a particular feedthrough or connector meets the intended pressure or vacuum requirements. The exact configuration and installation method must be considered when confirming suitability.

Consider Mechanical Strength and Mounting

The connector must fit securely into the equipment while withstanding the expected mechanical loads. Mounting dimensions, wall thickness, thread type, flange design, and available installation space all influence component selection.

Engineers should check the mounting drawing rather than relying only on a product photograph or general description. Small differences in thread dimensions, flange sizes, or sealing arrangements can prevent proper installation.

Vibration and cable movement also require attention. Unsupported cables can place unnecessary force on the connector and its mounting interface. Suitable strain relief and cable supports can help reduce these loads.

The surrounding equipment housing must be strong enough to support the assembly and resist the intended pressure. Even a high-quality hermetic connector cannot compensate for a distorted mounting surface or an inadequately designed enclosure.

If the component must be installed in a restricted space, engineers should confirm that there is enough room for tools, wiring, mating connectors, and future maintenance.

Review Temperature and Chemical Compatibility

Temperature affects both sealing materials and electrical performance. Components may be exposed to elevated temperatures during normal operation, temporary process changes, or nearby equipment heating.

Engineers should confirm the specified operating temperature range and determine whether the rating applies to the complete assembly. The housing, conductors, insulating materials, cable insulation, and mating connector may have different limits.

Thermal cycling can create stresses when materials expand and contract at different rates. For this reason, the maximum temperature alone may not fully describe the environmental challenge.

Chemical compatibility must be assessed separately. Exposure to oils, solvents, cleaning fluids, process gases, or corrosive substances can affect materials differently depending on concentration, temperature, and duration.

When the environment is uncertain, engineers should seek manufacturer guidance and avoid making assumptions based on broad material categories.

Verify Quality and Testing Requirements

Quality documentation helps confirm that a selected component meets the required specifications. Depending on the application, relevant information may include dimensional drawings, material details, pressure ratings, electrical ratings, and leak-test results.

Engineers should confirm how the product is tested and whether the stated results apply to the exact configuration being purchased. If the project requires a particular leak rate or qualification procedure, that requirement should be communicated before ordering.

Testing may include leak testing, electrical continuity checks, insulation resistance measurements, dielectric testing, or other procedures appropriate to the product.

Additional environmental testing may be necessary for equipment exposed to vibration, temperature cycling, or repeated pressure changes. The testing program should reflect the intended operating environment and the consequences of failure.

Clear documentation can also support maintenance planning, future procurement, and traceability when equipment must be serviced or replaced.

Work With the Manufacturer During Selection

Manufacturer consultation can help resolve questions that are difficult to answer from a product listing alone. Engineers should provide a concise application specification containing the operating environment, pressure or vacuum conditions, electrical requirements, mounting dimensions, and any required testing.

PAVE Technology can be contacted for relevant product information and engineering guidance on hermetic seals and connector configurations. Buyers should verify the availability, ratings, and suitability of each specific product rather than assuming that all configurations share the same performance limits.

A structured technical discussion can help identify whether a standard component meets the requirements or whether a different configuration is necessary.

It is also useful to discuss installation procedures, maintenance expectations, lead times, and documentation before making a final purchasing decision. These factors can influence project schedules and the overall cost of the equipment.

Conclusion

Choosing the right hermetic feedthrough for industrial equipment requires a complete understanding of environmental conditions, leakage limits, electrical specifications, materials, mounting arrangements, and quality requirements.

Hermetic seals and hermetic connectors must perform reliably as part of the entire equipment system. Engineers should verify pressure and temperature ratings, confirm chemical compatibility, and ensure that installation and testing procedures support the intended performance.

By preparing a clear specification and consulting the manufacturer when necessary, industrial equipment designers can make better-informed selections. PAVE Technology’s hermetic sealing and feedthrough solutions can be evaluated against these requirements to help identify suitable options for specialized industrial applications.

Author:

Leave a Reply

Your email address will not be published. Required fields are marked *